Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 281
B
Supplementary Services
Enable or disable the corresponding supplementary services on the phone. A
value of “yes” indicates enabled; “no” indicates disabled.
Remote Active LED LED pattern during the Remote Active state, where
another station is engaged in an active call on this
shared call appearance. Not applicable is this call
appearance is not shared. Leaving this entry blank
indicates the default value of c=r;p=d.
Local Held LED LED pattern during the Local Held state, where the call
appearance is held by this station. Leaving this entry
blank indicates the default value of c=r;p=s.
Remote Held LED LED pattern during the Remote Held state, where
another station has placed this call appearance on
hold. Not applicable if the call appearance is not
shared. Leaving this entry blank indicates the default
value of c=r,p=s.
Register Failed LED LED pattern when the corresponding extension has
failed to register with the proxy server. Leaving this
entry blank indicates the default value of c=a.
Disabled LED LED pattern when the Call Appearance is disabled (not
available for any incoming or outgoing call). Leaving
this entry blank indicates the default value of c=o.
Registering LED LED Pattern when the corresponding extension is
trying to register with the proxy server. Leaving this
entry blank indicates the default value of c=r;p=s.
Call Back Active LED Call Back operation is currently active on this call
appearance is not shared. Leaving this entry blank
indicates the default value of c=r;p=s.
Trunk In-Use LED LED pattern that indicates that a shared trunk is in use.
Trunk No Service LED LED pattern that indicates that a shared trunk is not in
service.
Trunk Reserved LED LED pattern to indicate that a shared trunk has been
reserved.
Parameter Description
To Next Page
Loading...
Need help?
General
