Cisco SPA303 Administration Guide

Getting Started
Using the Web-Based Configuration Utility
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 25
1
The Administrator account can modify all web profile parameters, including web
parameters available to the user login. The Administrator specifies the parameters
that a User account can modify using the Provisioning tab of the configuration
utility.
NOTE No default passwords are assigned to either the Administrator or User accounts.
Only the Administrator account can assign and change passwords.
Accessing Administrative Options
To access administrative options, either:
• Log in to the configuration utility, then click Admin Login.
• Enter the following URL when accessing the configuration utility:
http://phone.ip.address/admin/
NOTE To save changes on a web page, click Submit All Changes before switching
between User and Admin Login or between basic and advanced views. Switching
logins or views discards any unsubmitted changes.
Understanding Basic and Advanced Views
These views are similar, but advanced view shows more options on each web
page. To see all available options for your login, use the
advanced view.
Using the Web Administration Tabs
Each tab contains different parameters. Some tasks require you to set parameters
in different tabs.
For field reference about each parameter available on the configuration utility, see
Appendix B, “Cisco SPA IP Phone Field Reference.”
Roadmap to Configuration Utility Features
The following tables provide a roadmap to features available in the configuration
utility.

Cisco SPA303 Specifications

General

Display	Monochrome LCD
Lines	3
Speakerphone	Yes
Headset Jack	Yes (2.5 mm)
Handset	Yes
Ethernet Ports	2 x 10/100 Mbps
Protocol	SIP
Power	Power over Ethernet (PoE) or AC adapter
Audio Codec Support	G.711, G.729
QoS	802.1p/q