Cisco SPA303 Administration Guide

Cisco SPA IP Phone Field Reference
Cisco SPA525G/525G2-Specific Tabs
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 319
B
Bluetooth
For more information on configuring Bluetooth, see Configuring Bluetooth (Cisco
SPA525G/525G2 only), page 77.
Parameter Description
Wireless Enable Click On to enable the wireless controller.
Wi-Fi Device Choose the method of wireless setup:
• Wi-Fi Profile—Create a wireless profile by
manually entering information.
• Wi-Fi Protected Setup—If your router has a WPS
button, you can use Wi-Fi Protected Setup to
add a new wireless network profile.
Wireless Status Contains information about the wireless network.
Wi-Fi Profile Contains up to 3 wireless profiles for the phone.
Includes a wireless profile for the Cisco Unified
Communications Server by default.
Parameter Description
Bluetooth Device Click On to enable Bluetooth.
Bluetooth Status (Cisco
SPA525G2 only)
Shows the name and status of any connected
Bluetooth devices.

Cisco SPA303 Specifications

General

Display	Monochrome LCD
Lines	3
Speakerphone	Yes
Headset Jack	Yes (2.5 mm)
Handset	Yes
Ethernet Ports	2 x 10/100 Mbps
Protocol	SIP
Power	Power over Ethernet (PoE) or AC adapter
Audio Codec Support	G.711, G.729
QoS	802.1p/q