Cisco SPA303 Administration Guide

3
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 45
Customizing Cisco SPA and Wireless IP
Phones
This chapter describes customizing the SPA IP phones and contains the following
sections:
• Configuring Phone Information and Display Settings, page 46
• Configuring Linksys Key System Parameters, page 54
• Enabling Call Features, page 54
• Customizing Phone Softkeys, page 62
• Configuring the Message Waiting Indicator, page 69
• Configuring Ring Tones, page 70
• Configuring RSS Newsfeeds on the Cisco SPA525G/525G2 IP Phone,
page 74
• Configuring Audio Settings, page 75
• Enabling Wireless (Cisco SPA525G/525G2 only), page 77
• Configuring Bluetooth (Cisco SPA525G/525G2 only), page 77
• Enabling SMS Messaging, page 82
• Enabling the Web Server, page 84
• Configuring Lightweight Directory Access Protocol (LDAP) for the
Cisco SPA300 Series and Cisco SPA500 Series IP Phones, page 85
• Configuring BroadSoft Settings (Cisco SPA300 Series and Cisco
SPA500 Series), page 89
• Configuring XML Services, page 91

Cisco SPA303 Specifications

General

Display	Monochrome LCD
Lines	3
Speakerphone	Yes
Headset Jack	Yes (2.5 mm)
Handset	Yes
Ethernet Ports	2 x 10/100 Mbps
Protocol	SIP
Power	Power over Ethernet (PoE) or AC adapter
Audio Codec Support	G.711, G.729
QoS	802.1p/q