Cisco SPA IP Phone Field Reference
User Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 313
B
Supplementary Services
The IP phone provides native support of a large set of enhanced or
supplementary services. All of these services are optional. Most supplementary
service parameters are listed in Supplementary Services, page 281.
The user can enable or disable supplementary services and other settings in this
section.
A supplementary service should be disabled if the user has not subscribed for it,
or the service provider intends to support similar service using other means.
For more star code or supplementary service information, see Configuring
Supplementary Services (Star Codes), page 181.
Camera Settings (Cisco SPA525G/525G2)
The Cisco SPA525G/525/G2 works with the Cisco WVC2300 Wireless-G
Business Internet Video Camera and the Cisco PVC2300 Business Internet Video
Camera to provide simple video monitoring from your IP phone. See Entering
Camera Information Into the Cisco SPA525G/525G2 Configuration Utility,
page 96.
Web Information Service Settings (Cisco SPA525G/525G2)
NOTE These parameters apply only to the Cisco SPA525G/525G2.
For configuration information, see Configuring RSS Newsfeeds on the Cisco
SPA525G/525G2 IP Phone, page 74.
Audio Volume
NOTE Does not apply to the WIP310.
Parameter Description
Ringer Volume Sets the default volume for the ringer.
Speaker Volume Sets the default volume for the full-duplex speakerphone.
Handset Volume Sets the default volume for the handset.
To Next Page
Loading...
Need help?
General
