Cisco SPA303 Administration Guide

Configuring Security, Quality, and Network Features
Setting Optional Network Parameters
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 143
5
STEP 4 Configure the following fields:
STEP 5 Click Submit All Changes.
Setting Optional Network Parameters
STEP 1 Log in to the configuration utility.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the System tab.
STEP 4 Configure the following fields:
Parameter Description
PPPoE Login Name Specifies the account name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
PPPoE Login Password Specifies the password assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
PPPoE Service Name Specifies the service name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
Parameter Description
Host Name The host name of the phone.
Domain The network domain of the phone. However, if using
LDAP, see Configuring Lightweight Directory Access
Protocol (LDAP) for the Cisco SPA300 Series and
Cisco SPA500 Series IP Phones, page 85.

Cisco SPA303 Specifications

General

Display	Monochrome LCD
Lines	3
Speakerphone	Yes
Headset Jack	Yes (2.5 mm)
Handset	Yes
Ethernet Ports	2 x 10/100 Mbps
Protocol	SIP
Power	Power over Ethernet (PoE) or AC adapter
Audio Codec Support	G.711, G.729
QoS	802.1p/q