Customizing Cisco SPA and Wireless IP Phones
Configuring Phone Information and Display Settings
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 46
3
• Configuring Music On Hold, page 93
• Configuring Extension Mobility, page 94
• Configuring Video Surveillance on the Cisco SPA525G/525G2, page 95
Configuring Phone Information and Display Settings
The configuration utility allows you to customize the phone and configure settings
such as the phone name, background photo, logo, and screen saver.
Configuring the Phone Name
STEP 1 Log in to the configuration utility.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the Phone tab.
STEP 4 Under General, enter the Station Name, or name for the phone. This name shows
up in the corporate directory.
STEP 5 Click Submit All Changes. The phone reboots.
Configuring Voice Mail
To configure the phone to connect to voice mail:
STEP 1 Log in to the configuration utility.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the Phone tab.
STEP 4 Under General, enter the Voice Mail Number. This is the internal or external phone
number or URL to access the voice mail system. If using an external voice-mail
service, the number must include any digits required to dial out and any required
area code.
To Next Page
Loading...
Need help?
General
