Customizing Cisco SPA and Wireless IP Phones
Configuring Extension Mobility
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 94
3
STEP 1 Log in to the configuration utility.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the Ext <number> tab.
STEP 4 Under Call Feature Settings, in the MOH Server field, enter the user ID or the URL
of the MOH streaming audio server. If you enter a user ID (no server), the current or
outbound proxy is contacted. Defaults to blank (no MOH). If used with a Cisco SPA
9000 Voice System, defaults to
imusic
. For more information, see the
Cisco SPA
9000 Voice System Administration Guide
.
STEP 5 Click Submit All Changes.
Configuring Extension Mobility
NOTE This feature is not available on the WIP310.
Extension mobility allows mobile users to access their personalized phone
settings, such as the personal extensions, shared lines, and speed dials, from
other phones. For example, people who work different shifts or who work at
different desks during the week can share an extension, yet have their own
personalized settings. EM is supported for BroadSoft and other servers. EM
dynamically configures a phone according to the current user.
A Login prompt appears on the phone display when EM is enabled on a phone (for
example, a conference room phone). A user can either enter their User ID and
Password to access their personal phone settings, or ignore the login and use the
phone as a guest. After logging on, users have access to personal directory
numbers, services, speed dials, and other properties on the phone. When a user
logs out, the phone reverts to a basic profile with limited features enabled.
To configure extension mobility:
STEP 1 Log in to the configuration utility.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the Phone tab.
STEP 4 Under Extension Mobility, in the EM Enable field, choose yes.
To Next Page
Loading...
Need help?
General
