Customizing Cisco SPA and Wireless IP Phones
Enabling Call Features
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 58
3
Enabling Do Not Disturb
You can allow users to turn the Do Not Disturb feature on and off. This feature
directs all incoming calls to voice mail or, if voice mail is not configured, plays a
message to the caller saying the user is unavailable.
NOTE On the Cisco SPA300 Series and Cisco SPA500 Series IP Phones, users can press
the Ignore softkey to divert a ringing call to the forwarded destination.
To allow users to use Do Not Disturb (this is enabled by default):
STEP 1 Log in to the configuration utility.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the Phone tab.
STEP 4 Under Supplementary Services, under DND Serv, choose yes.
NOTE This feature can also be configured from the User tab, under Supplementary
Services.
STEP 5 Click Submit All Changes.
Enabling the Missed Call Shortcut
The IP phones can display a notification that a call has been missed. (Not
applicable to WIP310.) To enable this notification:
STEP 1 Log in to the configuration utility.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the User tab.
STEP 4 Under Supplementary Services, in the Miss Call Shortcut field, choose yes.
STEP 5 Click Submit All Changes.
To Next Page
Loading...
Need help?
General
