Cisco SPA303 Administration Guide

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 282
B
Parameter Description
Conference Serv Enable/disable Three way conference service.
Defaults to yes.
Attn Transfer Serv Enable/disable attended-call-transfer service.
Defaults to yes.
Blind Transfer Serv Enable/disable blind-call-transfer service.
Defaults to yes.
DND Serv Enable/disable do-not-disturb service.
Defaults to yes.
Block ANC Serv Enable/disable block-anonymous-call service.
Defaults to yes.
Call Back Serv Enable/disable call-back (a.k.a. repeating dialing)
service.
Defaults to yes.
Block CID Serv Enable/disable blocking outbound Caller-ID service.
Defaults to yes.
Secure Call Serv Enable/disable secure-call service.
Defaults to yes.
Cfwd All Serv Enable/disable call-forward-all service.
Defaults to yes.
Cfwd Busy Serv Enable/disable call-forward-on-busy service.
Defaults to yes.
Cfwd On No Ans Serv Enable/disable call-forward-on-no-answer service.
Defaults to yes.
Paging Serv Enable/disable the paging service.
Defaults to yes.

Cisco SPA303 Specifications

General

Display	Monochrome LCD
Lines	3
Speakerphone	Yes
Headset Jack	Yes (2.5 mm)
Handset	Yes
Ethernet Ports	2 x 10/100 Mbps
Protocol	SIP
Power	Power over Ethernet (PoE) or AC adapter
Audio Codec Support	G.711, G.729
QoS	802.1p/q