Customizing Cisco SPA and Wireless IP Phones
Configuring Phone Information and Display Settings
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 48
3
STEP 3 Click the Phone tab.
STEP 4 To display a text logo, in the Text Logo field, enter logo text as follows:
• Up to two lines of text
• Each line must be fewer than 32 characters
• Insert a new line character (\n) and escape code (%0a) between lines
For example, “Super\n%0aTelecom” will display:
Super
Telecom
• Use the + character to add spaces for formatting. For example, you can add
multiple + characters before and after the text to center it.
To display a picture logo:
a. In the BMP Picture Download URL field, enter the path as follows:
http://192.168.2.244/pictures/image04_128x48.bmp (you can also
use TFTP)
b. Change Select Logo to BMP Picture.
STEP 5 Click Submit All Changes. The phone reboots, retrieves the .bmp file, and displays
it when it next boots.
Cisco SPA525G/525G2:
STEP 1 Log in to the configuration utility.
STEP 2 Admin Login and advanced.
STEP 3 Click the User tab. In the Screen section, Text Logo field, enter logo text as follows:
• Up to two lines of text
• Each line must be fewer than 32 characters
• Insert a new line character (\n) and escape code (%0a) between lines
For example, “Super\n%0aTelecom” will display:
Super
Telecom
To Next Page
Loading...
Need help?
General
