Cisco SPA303 Administration Guide

Cisco SPA IP Phone Field Reference
Ext Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 302
B
Message Waiting Indicates whether the Message Waiting Indicator on
the phone is lit. This parameter is toggled by a
message from the SIP proxy to indicate if a message is
waiting. You can manually modify it to clear or set the
flag in the Ext 1-6 tab.
Setting this value to Yes can activate stutter tone and
VMWI signal. This parameter is stored in long-term
memory and survives after reboot or power cycle.
Defaults to No.
Auth Page Specifies whether to authenticate the invite before
auto answering a page.
Defaults to No.
Default Ring Type of ring heard. This corresponds to the Ring Tone
on the Phone tab. Choose from No Ring, 1 through 10,
User 1, or User 2.
Defaults to 1.
Auth Page Realm Identifies the Realm part of the Auth that is accepted
when the Auth Page parameter is set to Yes. This
parameter accepts alphanumeric characters.
Defaults to blank.
Conference Bridge URL This is the URL used to join into a conference call,
generally in the form of the word “conference” or
“user@IPaddress:port”.
Defaults to blank.
Auth Page Password Identifies the password used when the Auth Page
parameter is set to Yes. This parameter accepts
alphanumeric characters.
Defaults to blank.
Mailbox ID Identifies the voice mailbox number/ID for the phone.
Defaults to blank.
Voice Mail Server Identifies the SpecVM server for the phone, generally
the IP address and port number of the VM server.
Voice Mail Subscribe Interval The expiration time, in seconds, of a subscription to a
voice mail server.
Parameter Description

Cisco SPA303 Specifications

General

Display	Monochrome LCD
Lines	3
Speakerphone	Yes
Headset Jack	Yes (2.5 mm)
Handset	Yes
Ethernet Ports	2 x 10/100 Mbps
Protocol	SIP
Power	Power over Ethernet (PoE) or AC adapter
Audio Codec Support	G.711, G.729
QoS	802.1p/q