Configuring Lines and Extensions
Configuring Lines
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 42
2
Parameters Description
Idle LED Appears when the line is idle.
Defaults to blank (c=r).
Remote Undefined
LED
LED pattern during the Remote Undefined state, where the
shared call state is undefined (the station is still waiting for the
state information from the application server). Not applicable if
the call appearance is not shared. Leaving this entry blank
indicates the default value of c=r;p=d.
Local Seized LED Appears when this station seizes the call appearance to
prepare for a new outbound call.
Defaults to blank (c=r).
Remote Seized LED
(applicable only to
shared call
appearance)
Appears when the shared call appearance is seized by
another station.
Defaults to blank (c=r; p=d).
Local Progressing
LED
Appears when this station attempts an outgoing call on this call
appearance (the called number is ringing).
Defaults to blank (c=r).
Remote Progressing
LED
(applicable only to
shared call
appearance)
Appears when another station attempts an outbound call on
this shared call appearance.
Defaults to blank (c=r; p=d).
Local Ringing LED Appears when the call appearance is ringing.
Defaults to blank (c=r;p=f).
Remote Ringing LED
(applicable only to
shared call
appearance)
Appears when the shared call appearance is in ringing on
another station.
Defaults to blank (c=r;p=d).
Local Active LED Appears when the call appearance is engaged in an active call.
Defaults to blank (c=r).
To Next Page
Loading...
Need help?
General
