OPERATING THE TRANSCEIVER
DATA OPTIONS
ENVOY® TRANSCEIVER GETTING STARTED GUIDE 97
CAUTION: When VCOM is used over an Ethernet cable, the
RFU 6way MIL/STANAG 2G Data and RFU GP
Port MIL/STANAG 2G Data peripheral devices
must not be selected on the respective ports.
NOTE: For information on setting up the data station, please
see the Reference Manual (Codan part number
15-04176-EN issue 7).
Related links:
Using VCOM services on page 126
Sending email via RC50-C
An email message is sent via your email client to the RC50-C HF
Email software, which passes it to the MIL/STANAG 2G Data
processor. The processor passes the message to the transceiver,
which transmits it over the air.
To send an email message:
1 Launch the RC50-C HF Email software, then click Go
Online to activate the MIL/STANAG 2G Data processor.
The transceiver responds with a beep.
To Next Page
Loading...
Need help?
General
