NAVIGATING THE MENU STRUCTURE
ENTERING TEXT IN A FIELD
ENVOY® TRANSCEIVER GETTING STARTED GUIDE 157
1 Do any of the following:
• Press or to move the cursor to the point at
which you want to enter text.
• Press (on SCAN key) to delete text to the left of
the cursor.
• Hold to delete the whole entry.
• Press the key on the keypad that corresponds to the
letter that you want to enter.
For example, if you want to enter the letter E, press 3
twice.
After a brief pause, the cursor moves to the next
space, ready to enter another character.
NOTE: If you are in a letter-entry mode and
want to enter a number, hold the key
corresponding to the number that you
want to enter.
1 Press to move to the next entry.
Related links:
Entering text with the 2221 Handset on page 158
Entering a special character (2220/2230)
You can enter special characters in messages, names, contacts, and
in addresses of stations that you call.
NOTE: If the FED-STD-1045 ALE/CALM option or
MIL-STD-188-141B ALE option is installed in your
transceiver, the key may be used to enter the
global ALL address syntax (@?@) or special ALE
addressing characters easily.
To enter a special character in an address, message or contact:
1 Press or to move the cursor to the point where you
want to insert a special character.
To Next Page
Loading...
Need help?
General
