Codan Envoy - Adding a Message Call

CONTACTS
ADDING A CONTACT
132 ENVOY® TRANSCEIVER GETTING STARTED GUIDE
1 Enter the address of the station that you want to call.
1 Continue from Completing the contact on page 135.
Adding a Message call
To continue with adding a Message call:
1 Press to move to the Address | Selcall Address |
ALE Address entry.
1 Enter the address of the station that you want to call.
1 Press to move to the Message entry, then press .
NOTE: If you want to be prompted to enter a message
at the time of the call, leave the value for the
Message entry as <Empty>.