OPERATING THE TRANSCEIVER
USING GPS
76 E
NVOY® TRANSCEIVER GETTING STARTED GUIDE
1 Press to move to the waypoint that you want to set.
1 Press (Options), scroll to Set, then press
(Select).
Updating a waypoint from the Call History
You can update a waypoint using information from a Get Position
call or a received Send Position call in the Call History. If you do
not want to use the waypoint information immediately, you may
save it. Waypoints that are saved via the Distance and Bearing
tab are automatically added to the Waypoints tab at the same
location, and to the list of waypoints in User Data > Waypoints.
To update a waypoint from the Call History:
1 Do one of the following:
•Press9|
GPS.
• From the main menu, select (General), then
(GPS).
1 Press to move to the Distance and Bearing tab.
1 Press (Waypoint), then press or to select the
Call History tab.
The information available is filtered on Get Position calls
that you have sent and Send Position calls that you have
received.
To Next Page
Loading...
Need help?
General
