INSTALLING THE TRANSCEIVER
OVERVIEW OF MOBILE STATIONS
178 ENVOY® TRANSCEIVER GETTING STARTED GUIDE
Cables in a mobile station
NOTE: Cables 08-06022-001 and 08-03255 are 6 m cables
only. Cables 08-01503-006 and 08-05627-006 are
6 m cables and are available in a number of shorter
and longer lengths.
Mounting a mobile Envoy® station
Most components of a mobile Envoy® station are provided with
their own mounting cradles. For general guidance on suitable
locations for equipment and installing these stations see the
reference material on the enclosed CD.
Mounting the handset cradle
To mount the handset cradle:
1 Mount the handset according to the fitting instructions
(Codan part number 15-00149-001) provided with the
handset cradle.
Table 9: Cables for a typical mobile Envoy® station
Cable Symbol Part number
Handset and speaker connector 08-06022-001
Coaxial cable between RFU and antenna 08-01503-006
Control cable between RFU and antenna 08-05627-006
DC power supply cable 08-03255
To Next Page
Loading...
