Codan Envoy Getting Started Guide

OPERATING THE TRANSCEIVER
USING GPS
E
NVOY® TRANSCEIVER GETTING STARTED GUIDE 77
1 Press or to scroll to the call containing the GPS
information that you want to use for the waypoint.
1 If you want to set the GPS information as the current
waypoint, press (Options), scroll to Set, then
press (Select).
1 If you want to save the GPS information as a waypoint:
•Press (Options), scroll to Save, then
press (Select).
• Enter the name that you want to use for the waypoint.
NOTE: If required, you can change the GPS
information.
•Press (Options), scroll to Save, then
press (Select).
1 Press (Close).
Updating a waypoint from a contact
You can update a waypoint using information gathered from a Get
Position call for a contact.
To update a waypoint from a contact:
1 Do one of the following:
•Press9|
GPS.
• From the main menu, select (General), then
(GPS).
1 Press to move to the Distance and Bearing tab.
1 Press (Waypoint), then press or to select the
Contacts tab.
The information available is filtered on Get Position calls to
contacts that have been set up in User Data > Contacts.

Codan Envoy Specifications

General

Brand	Codan
Model	Envoy
Category	Transceiver
Language	English