Codan Envoy - Changing the Privacy Code

OPERATING THE TRANSCEIVER
USING ENCRYPTION
110 ENVOY® TRANSCEIVER GETTING STARTED GUIDE
To select a secure key:
1 If you are using a 2220 Handset or 2230 Desk Console, do
one of the following:
• From the main menu,select (General), then
(Secure).
• Hold
SEC.
1 If you are using a 2221 Handset:
• From the main menu, select (Functions).
• Press or to scroll to the Secure Info function.
•Press (Select).
1 Press or to scroll to the Select Key Index entry.
1 Press or to select thesecure key indexthat you want to
use.
Hold the key to scroll rapidly through the secure key
indexes.
1 Press (Activate).
The transceiver goes secure on the selected key.
Changing the privacy code
The CIVS scrambler operates on one of 32 codes. You can change
the current privacy code, if permitted.