OPERATING THE TRANSCEIVER
UPGRADING THE TRANSCEIVER VIA A USB STICK
122 ENVOY® TRANSCEIVER GETTING STARTED GUIDE
Upgrading the transceiver via a USB
stick
Firmware packages for the transceiver or the RM50 module,
profiles from TPS System Programmer, and secure keys from KMS
may be loaded onto a USB stick, providing a portable method of
upgrading transceivers in the field. You can also read a profile from
a transceiver in the field. When the USB stick is connected to the
control point, a selection menu is shown for various activities
depending on the values set by your system administrator.
If you have multiple control points connected to the RFU during
any of the following operations, the control point that initiates the
operation displays the progress. All other control points display a
message indicating that the RFU is busy.
To manage profiles, firmware, and secure keys:
1 Connect your USB stick to the control point using a
standard USB A (female) to micro USB cable (Codan part
number 67-90406).
The USB stick is detected automatically. A Select Task
icon ( ) is now available in the main menu screen.
1 Enter the correct admin PIN, if requested.
1 Press or to scroll to the activity that you want to
perform:
• If you want to program a profile from the USB stick
to the transceiver, select Program Profile.
To Next Page
Loading...
Need help?
General
