NAVIGATING THE MENU STRUCTURE
ENTERING TEXT IN A FIELD
160 ENVOY® TRANSCEIVER GETTING STARTED GUIDE
1 If you want to change the input language:
• Hold Ctrl then press Shift to open the Select Input
Language screen.
• Press or to scroll to the input language that you
want to use, then press Enter.
•Press (Save).
1 By default, existing text in the field is highlighted when you
enter the field. Do one of the followings:
• To use this text, press .
• To delete this text, start entering new text.
• To edit this text, press to place the cursor at the
end of the text.
1 To edit the text, you can do any of the following:
• Press the arrow keys on the USB keyboard to move
the cursor to the point at which you want to enter
text.
•PressDelete or Backspace keys on the USB
keyboard to delete text you don't need.
• Hold Backspace key on the USB keyboard to
delete the whole entry.
• Press the key on the USB keyboard that corresponds
to the symbol that you want to enter.
1 Press to move to the next entry.
Editing text with a USB keyboard
The user interface of the control point provides basic text editing
functions for the USB keyboard, including selecting, copying,
cutting and pasting text.
To edit the text in a field:
1 Press the arrow keys on your keyboard to place the cursor at
the beginning of the text you want to copy or cut.
To Next Page
Loading...
Need help?
General
