Codan Envoy - Using the 2.4 Kbit;S Data Station

OPERATING THE TRANSCEIVER
DATA OPTIONS
88 ENVOY® TRANSCEIVER GETTING STARTED GUIDE
CAUTION: The USB–USB connection may be used with
2220/2221 Handsets and 2230 Desk Consoles in
stations that are not exposed to excessive local HF
interference.
CAUTION: Data transmitted via a VCOM session over a
USB–USB connection may be affected by your
computer’s power-saving activities. Either disable
the power-saving mode while data is being
transmitted, or verify that the data has been sent
correctly when the computer wakes from
power-saving mode.
NOTE: For information on setting up the data station, please
see the Reference Manual (Codan part number
15-04176-EN issue 7).
Related links:
Using VCOM services on page 126
Using the 2.4 kbit/s data station
Making a data call
Data calls are made in the background when you send an email via
UUPlus©/Codan Chat© (or similar), or when transferring a file
between terminal sessions.
NOTE: For information on sending an email via
UUPlus©/Codan Chat©, please see the
documentation provided with the software.
To make a data call:
1 Compose your email in UUPlus©/Codan Chat© (or
similar).