INTRODUCTION
THE 2220 HANDSET
4ENVOY® TRANSCEIVER GETTING STARTED GUIDE
The 2220 Handset is shipped from the factory with standard
functions pre-programmed to specific keys. The standard function
is written on the key in
BLUE text. New user-defined functions
may be assigned to most of the keys.
NOTE: Handsets with a Mk 2 label on the rear escutcheon
are compatible with all transceiver configurations,
and are specifically designed to provide a received
audio signal for an Envoy SmartLink. Mk 2 handsets
are identified in Information > Device
Information > Hardware Options as Mk 2
(Envoy SmartLink enabled).
Related links:
Keypad on page 8
Navigating the menu structure on page 141
To Next Page
Loading...
