To Next Page

To Previous Page

INTRODUCTION

THE 2221 HANDSET

6ENVOY® TRANSCEIVER GETTING STARTED GUIDE

The 2221 Handset is a hand-held device that has a microphone, a

PTT button, a screen, and navigation keys. The navigation keys

enable you to operate the transceiver system via the user interface

using pre-defined profile information. Typically, this profile is

fully configured using the TPS System Programmer. The handset

and an external speaker connect to the RFU via a special interface

cable.

The 2221 Handset is shipped from the factory with specific

functions pre-programmed on the key, or in a general list that

is accessed via the Functions icon ( ). New user-defined

functions may be assigned to this general list.

NOTE: Handsets with a Mk 2 label on the rear escutcheon

are compatible with all transceiver configurations,

and are specifically designed to provide a received

audio signal for an Envoy SmartLink. Mk 2 handsets

are identified in Information > Device

Information > Hardware Options as Mk 2

(Envoy SmartLink enabled).

Codan Envoy Getting Started Guide

Other manuals for Codan Envoy