Introduction Parameter x.00
Parameter
description format
Keypad and
display
CT Modbus
RTU
User
programming
CT Soft Menu 0
Advanced parameter
descriptions
Menu 18
Commander SK Advanced User Guide 157
Issue Number: 2 www.controltechniques.com
Menu 18 contains parameter that do not affect the operation of the drive. These general purpose parameters are intended for use with fieldbus and
drive user programming. The read write parameters in this menu can be saved in the drive.
18.01 Application menu 1 power-down saved integer
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
111
Range -32768 to 32767
Default 0
Update rate N/A
18.02 to 18.10 Application menu 1 read-only integer
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
1
Range -32768 to 32767
Default 0
Update rate N/A
18.11 to 18.30 Application menu 1 read-write integer
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
11
Range -32768 to 32767
Default 0
Update rate N/A
18.31 to 18.50 Application menu 1 read-write bit
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
111
Range 0 or 1
Default 0
Update rate N/A
To Next Page
Loading...
