D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
97
16 3500
17 3500
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a ALL
config dscp user_priority
Purpose To enable setting the DSCP User Priority
Syntax
config dscp user_priority [<priority 0-63> <class_id 0-3>]
Description The config dscp user_priority command enables mapping the
DSCP value (the priority) to a specific queue (the class_id)
Parameters <priority 0-63> − The selected priority. The value may be between 0
and 63.
<class_id 0-3> The class_id (queue) mapped to the priority. The
value may be between 0 and 3.
Restrictions None.
Example usage:
To map the dscp user priority 22 to the class_id 1:
DGS-3100# config dscp user_priority 22 1
Success.
DGS-3100#
show dscp user_priority
Purpose To show the DSCP User Priority settings.
Syntax
show dscp user_priority
Description The show dscp user_priority command displays the class_ids
assigned to each user priority.
Restrictions None.
Example usage:
To show the dscp user priority:
DGS-3100# show dscp user_priority
QOS Class of Traffic
Priority-0 -> <Class-0>
Priority-1 -> <Class-0>
Priority-2 -> <Class-0>
Priority-3 -> <Class-0>
Priority-4 -> <Class-0>
Priority-5 -> <Class-0>
Priority-6 -> <Class-0>
Priority-7 -> <Class-0>

D-Link DGS-3100 SERIES Specifications

General

Type	Managed
Layer	Layer 2+
Ports	10/100/1000BASE-T
SFP Ports	2 or 4 (depends on the model)
Additional SFP Ports	No
VLANs	Yes
Stacking	Yes, Physical Stacking
QoS	Yes
Jumbo Frame Support	Up to 9K bytes
Management	Web-based
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Model	DGS-3100 SERIES
Storage Temperature	-40°C to 70°C