D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
15
Logging to file: Error messages
Logging to remote server: Informational messages
Maximum no. of syslog messages: 430
SNTP Port No.: 123
DGS-3100#
show switch
Purpose To display information about the Switch.
Syntax
show switch
Description The show switch command displays information about the Switch
settings, including Device Type, MAC Address, IP configuration,
Hardware/Software version, System information, and Switch
Network configuration.
Parameters None.
Restrictions None.
Example usage:
To display the Switch information:
DGS-3100# show switch
Device Type : DGS-3100-48 Gigabit stackable L2 Managed
Switch
MAC Address : 00:11:03:09:18:46
IP Address : 10.5.234.250
VLAN Name : default
Subnet Mask : 255.255.255.0
Default Gateway : 10.5.234.254
Boot PROM Version : 1.0.1.04
Firmware Version : 3.5P.A12
Hardware Version : 01
Serial Number : F3DU286000001(unit 1)
527(unit 2)
F3E7187000073(unit 3)
72678197819(unit 4)
656(unit 5)
548(unit 6)
System Name : DGS-3100
System Location :
System Contact :
System Up Time : 0 days 4 hours 49 mins 24 seconds
Spanning Tree : Disabled
GVRP : Disabled
IGMP Snooping : Disabled
TELNET : Enabled
WEB : Enabled (TCP 80)

D-Link DGS-3100 SERIES Specifications

General

Type	Managed
Layer	Layer 2+
Ports	10/100/1000BASE-T
SFP Ports	2 or 4 (depends on the model)
Additional SFP Ports	No
VLANs	Yes
Stacking	Yes, Physical Stacking
QoS	Yes
Jumbo Frame Support	Up to 9K bytes
Management	Web-based
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Model	DGS-3100 SERIES
Storage Temperature	-40°C to 70°C