EasyManuals Logo

D-Link DGS-3100 SERIES Cli Manual

D-Link DGS-3100 SERIES
228 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #81 background imageLoading...
Page #81 background image
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
72
Max Age : 20
Forwarding BPDU : Enabled
Loopback Detection : Enabled
Loopback Detection Interval : 60
DGS3100#
Status 3: STP enabled for MSTP
DGS3100# show stp
STP Status : Enabled
STP Version : MSTP
Max Age : 20
Hello Time : 2
Forward Delay : 15
Max Age : 20
Forwarding BPDU : Enabled
Loopback Detection : Enabled
Loopback Detection Interval : 60
DGS3100#
show stp ports
Purpose To display the Switch’s current instance_id configuration.
Syntax
show stp ports {<portlist> | <ch1-32>}
Description The show stp ports command displays the STP Instance Settings
and STP Instance Operational Status currently implemented on the
Switch.
Parameters <portlist> – A port or range of ports to be configured. The port list is
specified by listing switch number and the beginning port number on
that switch, separated by a colon. Then the highest port number of
the range is specified. The beginning and end of the port list range
are separated by a dash. For example, 1:3 specifies switch number
1, port 3. 1:22 specifies switch number 1, port 22. 1:3-22 specifies all
of the ports of switch 1, between port 3 and port 22 in numerical
order.
<ch1-32> a port-channel.
Restrictions None.
Example usage:
To show stp port 9 on switch one:
DGS3100# show stp ports 1:9
MSTP Port Information
---------------------------------
Port Index : 1:9,Port STP enabled
External PathCost : Auto/200000,Edge Port : No /No,P2P : Auto /Yes

Table of Contents

Other manuals for D-Link DGS-3100 SERIES

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DGS-3100 SERIES and is the answer not in the manual?

D-Link DGS-3100 SERIES Specifications

General IconGeneral
TypeManaged
LayerLayer 2+
Ports10/100/1000BASE-T
SFP Ports2 or 4 (depends on the model)
Additional SFP PortsNo
VLANsYes
StackingYes, Physical Stacking
QoSYes
Jumbo Frame SupportUp to 9K bytes
ManagementWeb-based
Operating Temperature0°C to 40°C
Humidity10% to 90% non-condensing
Standards ComplianceIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
ModelDGS-3100 SERIES
Storage Temperature-40°C to 70°C

Related product manuals