D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
108
Success.
DGS-3100#
disable asymmetric_vlan
Purpose To disable Asymmetric VLAN on the switch.
Syntax
disable asymmetric_vlan
Description The disable asymmetric_vlan command, along with the enable
asymmetric_vlan command below, is used to disable and enable
Asymmetric VLAN on the Switch.
Parameters None.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To disable asymmetric_vlan on the switch:
DGS-3100# disable asymmetric_vlan
Success.
DGS-3100#
show asymmetric_vlan
Purpose To display the Asymmetric VLAN status on the Switch.
Syntax
show asymmetric_vlan
Description The show asymmetric_vlan command displays the Asymmetric
VLAN status on the Switch.
Parameters None.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To display Asymmetric VLAN status:
DGS-3100# show asymmetric_vlan
Asymmetric VLAN : Enable
DGS-3100#

D-Link DGS-3100 SERIES Specifications

General

Type	Managed
Layer	Layer 2+
Ports	10/100/1000BASE-T
SFP Ports	2 or 4 (depends on the model)
Additional SFP Ports	No
VLANs	Yes
Stacking	Yes, Physical Stacking
QoS	Yes
Jumbo Frame Support	Up to 9K bytes
Management	Web-based
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Model	DGS-3100 SERIES
Storage Temperature	-40°C to 70°C