D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
117
the Switch.
Parameters None.
Restrictions Only administrator or operator-level users can issue this command
Example usage:
To enable IGMP snooping on the Switch:
DGS3100# enable igmp_snooping
Success.
DGS3100#
disable igmp_snooping
Purpose To disable IGMP snooping on the Switch.
Syntax
disable igmp_snooping
Description The disable igmp_snooping command disables IGMP snooping on
the Switch. IGMP snooping can be disabled only if IP multicast
routing is not being used. Disabling IGMP snooping allows all IGMP
and IP multicast traffic to flood within a given IP interface.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
TTo disable IGMP snooping on the Switch:
DGS3100# disable igmp_snooping
Success.
DGS3100#
show igmp_snooping
Purpose To show the current status of IGMP snooping on the Switch.
Syntax
show igmp_snooping {vlan <vlan_name 32>}
Description The show igmp_snooping command displays the current IGMP
snooping configuration on the Switch.
Parameters <vlan_name 32> − The name of the VLAN for which IGMP snooping
configuration is to be displayed. Up to 32 characters can be used.
Restrictions None.
Example usage:
To show igmp snooping:
DGS3100# show igmp_snooping
IGMP Snooping Global State : Disabled

D-Link DGS-3100 SERIES Specifications

General

Type	Managed
Layer	Layer 2+
Ports	10/100/1000BASE-T
SFP Ports	2 or 4 (depends on the model)
Additional SFP Ports	No
VLANs	Yes
Stacking	Yes, Physical Stacking
QoS	Yes
Jumbo Frame Support	Up to 9K bytes
Management	Web-based
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Model	DGS-3100 SERIES
Storage Temperature	-40°C to 70°C