D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
87
show traffic control
Purpose To display current traffic control settings.
Syntax
show traffic control {ports <portlist>}
Description The show traffic control command displays the current storm traffic
control configuration on the Switch.
Parameters ports <portlist> - A port or range of ports whose settings are to be
displayed.
Restrictions None.
Example usage:
To display traffic control setting for ports 1-5:
DGS3100# show traffic control
Traffic Control
Broadcast Multicast Destination
Port Threshold Storm Storm Lookup Fail
-------- -------------- ------------ ---------- ------------
1:1 3500 disable disable disable
1:2 3500 disable disable disable
1:3 3500 disable disable disable
1:4 3500 disable disable disable
1:5 3500 disable disable disable
1:6 3500 disable disable disable
1:7 3500 disable disable disable
1:8 3500 disable disable disable
1:9 3500 disable disable disable
1:10 3500 disable disable disable
1:11 3500 disable disable disable
1:12 3500 disable disable disable
1:13 3500 disable disable disable
1:14 3500 disable disable disable
1:15 3500 disable disable disable
1:16 3500 disable disable disable
1:17 3500 disable disable disable
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a ALL

D-Link DGS-3100 SERIES Specifications

General

Type	Managed
Layer	Layer 2+
Ports	10/100/1000BASE-T
SFP Ports	2 or 4 (depends on the model)
Additional SFP Ports	No
VLANs	Yes
Stacking	Yes, Physical Stacking
QoS	Yes
Jumbo Frame Support	Up to 9K bytes
Management	Web-based
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Model	DGS-3100 SERIES
Storage Temperature	-40°C to 70°C