DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
216
show safeguard_engine
Purpose To show the safeguard engine status on the switch.
Syntax
show safeguard_engine
Description To show the safeguard engine on the switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To show the safeguard engine status on the switch:
DGS-3100# show safeguard_engine
Safe Guard : Enable
Rising Threshold (20%-100%) : 70
Falling Threshold (20%-100%): 20
Status : No attack
DGS-3100#
To Next Page
Loading...
