D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
163
Authenticate failed attempts : 3
Listened Port Number : 22
DGS3100#
show ssh algorithm
Purpose To display the SSH algorithm setting.
Syntax
show ssh algorithm
Description The show ssh algorithm command displays the current SSH
algorithm setting status.
Parameters None.
Restrictions None.
Example usage:
To display SSH algorithms cuurently set on the Switch:
DGS3100# show ssh algorithm
Encryption Algorithm
----------------------------------
3des-cbc
AES128
AES192
AES256
RC4
Data Integrity Algorithm
----------------------------------
MD5
SHA1
Public Key Algorithm
---------------------------------
RSA
DSA
DGS3100#
config ssh crypto
Purpose To specify which SSH public key is manually configured.
Syntax
config ssh crypto <username 1-48> [ rsa | dsa ] <sequences>
Description The config ssh crypto command specifies which SSH public key is
manually configured. The key string needs to be in UU-encoded
DER fomat. UU-encoded format is the same format in the
authorized_keys file used by OpenSSH.

D-Link DGS-3100 SERIES Specifications

General

Type	Managed
Layer	Layer 2+
Ports	10/100/1000BASE-T
SFP Ports	2 or 4 (depends on the model)
Additional SFP Ports	No
VLANs	Yes
Stacking	Yes, Physical Stacking
QoS	Yes
Jumbo Frame Support	Up to 9K bytes
Management	Web-based
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Model	DGS-3100 SERIES
Storage Temperature	-40°C to 70°C