DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
208
config access_profile
Purpose To delete a specific rule from the access profile on the Switch.
Syntax
config access_profile profile_id <value 1-15> delete access_id
<value 1-240>
Description The config access_profile command deletes a specific rule from
the access profile on the Switch.
Parameters profile_id <value 1-15> - Specifies the access profile id that is used
to identify the access profile to be configured with this command.
delete access_id <value 1-240> – Specifies the specific rule to be
deleted from the profile.
Restrictions Only administrator or operate-level users can issue this command.
Example usage:
To delete a rule from the access profile:
DGS3100# config access_profile profile_id 2 delete access_id 2
Success.
DGS3100#
delete access_profile
Purpose To delete a previously created access profile
Syntax
delete access_profile profile_id <value 1-15>
Description The delete access_profile command deletes a previously created
access profile on the Switch.
Parameters profile_id <value 1-15> – Specifies the access profile to be deleted.
Restrictions Only administrator or operate-level users can issue this command.
Example usage:
To delete the access profile with a profile ID of 1:
DGS3100# delete access_profile profile_id 1
Success.
DGS3100#
show access_profile
Purpose To display the currently configured access profiles on the Switch.
Syntax
show access_profile {profile_id <value 1-15>}
Description
The show access_profile command displays the currently
configured access profiles.
Parameters
profile_id <value 1-15> – Specifies the access profile to be
displayed. This value is assigned to the access profile when it is
created with the create access_profile command. If the profile_id
To Next Page
Loading...
