D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
58
clear counters
Purpose To clear the Switch’s statistics counters.
Syntax
clear counters
Description The clear counters command clears the counters used by the
Switch to compile statistics.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To clear the counters:
DGS3100# clear counters
Success.
DGS3100#
clear log
Purpose To clear the Switch’s history log.
Syntax
clear log
Description The clear log command clears the Switch’s history log.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To clear the log information:
DGS3100# clear log
Success.
DGS3100#
show log
Purpose To display the Switch history log.
Syntax
show log {index <value>}
Description The show log command displays the contents of the Switch’s
history log.
Parameters index <value> − The number of entries in the history log to display.
Restrictions None.
Example usage:
To display the Switch history log:
DGS3100# show log

D-Link DGS-3100 SERIES Specifications

General

Type	Managed
Layer	Layer 2+
Ports	10/100/1000BASE-T
SFP Ports	2 or 4 (depends on the model)
Additional SFP Ports	No
VLANs	Yes
Stacking	Yes, Physical Stacking
QoS	Yes
Jumbo Frame Support	Up to 9K bytes
Management	Web-based
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Model	DGS-3100 SERIES
Storage Temperature	-40°C to 70°C