D-Link DGS-3100 SERIES - Show Time_Range

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
210
Example usage:
To configure the time range on the Switch:
DGS3100# DGS-3100# config time_range xxx hours start_time 10:00 end_time 11:00
weekdays wed sun
Success.
DGS3100#
show time_range
Purpose To display the currently configured access profiles on the Switch.
Syntax
show time_range
Description
The show time_range command displays the time range
configuration.
Parameters None
Restrictions None
Example usage:
To display time range settings on the Switch:
DGS3100# show time_range
Range name : xxx
Start time : 10:00
End time : 11:00
Days : wed sun
Total Entries : 1
DGS3100#