D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
25
disable telnet
Purpose To disable telnet.
Syntax
disable telnet
Description The disable telnet command disables telnet.
Parameters None.
Restrictions Only Administrator or operate-level users can issue this command
Example usage:
To disable telnet:
DGS3100# disable telnet
Success.
DGS3100#
enable dhcp_relay
Purpose To enable DHCP Relay server on the Switch
Syntax
enable dhcp_relay
Description The enable dhcp_relay command sets the DHCP Relay to be
globally enabled on the Switch and on all existing VLANs.
Parameters None.
Restrictions Only Administrator or operate-level users can issue this command.
Example usage:
To enable DCHP Relay on the Switch:
DGS-3100# enable dhcp_relay
Success.
DGS-3100# #
disable dhcp_relay
Purpose To disable DHCP Relay server on the Switch
Syntax
disable dhcp_relay
Description The disable dhcp_relay command sets the DHCP Relay to be
globally disabled on the Switch and on all existing VLANs.
Parameters None.
Restrictions Only Administrator or operate-level users can issue this command.

D-Link DGS-3100 SERIES Specifications

General

Type	Managed
Layer	Layer 2+
Ports	10/100/1000BASE-T
SFP Ports	2 or 4 (depends on the model)
Additional SFP Ports	No
VLANs	Yes
Stacking	Yes, Physical Stacking
QoS	Yes
Jumbo Frame Support	Up to 9K bytes
Management	Web-based
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Model	DGS-3100 SERIES
Storage Temperature	-40°C to 70°C