DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
175
DGS3100# delete authen_login method_list_name Trinity
Success.
DGS3100#
show authen_login
Purpose To display a previously configured user defined method list of
authentication methods for users logging on to the Switch.
Syntax
show authen_login {all | default | http_method_list |
https_method_list | method_list_name <string 12>}
Description The show authen_login command displays a list of authentication
methods for user login.
Parameters default – Displays the default method list for users logging on to the
Switch.
method_list_name <string 12> - Specifies the method_list_name to
display.
all – Displays all the authentication login methods currently
configured on the Switch.
The command displays the following parameters:
• Method List Name – The name of a previously configured
method list name.
• Method Name – Defines which security protocols are
implemeted, per method list name.
Restrictions None
Example usage:
To view all authentication login method list names:
DGS3100# show authen_login all
Method List Name Method Name
-------------------------- --------------------------------
default : Local
DGS3100#
create authen_enable method_list_name
Purpose To create a user-defined method list of authentication methods for
promoting normal user level privileges to Administrator level
privileges on the Switch
Syntax
create authen_enable method_list_name <string 12>
Description The create authen_enable method_list_name command creates a
list of authentication methods for promoting users with normal level
privileges to Administrator level privileges using authentication
methods on the Switch. Once a user acquires normal user level
privileges on the Switch, he or she must be authenticated by a
method on the Switch to gain administrator privileges on the Switch,
To Next Page
Loading...
Need help?
General
