D-Link DGS-3100 SERIES - Configuring SNTP

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
48
disable snmp traps
Purpose To disable SNMP trap support on the Switch.
Syntax
disable snmp traps
Description The disable snmp traps command disables SNMP trap support on
the Switch.
Parameters Only Administrator or operator-level users can issue this command
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To prevent SNMP traps from being sent from the Switch:
DGS3100# disable snmp traps
Success.
DGS3100#
enable snmp authenticate trap
Purpose To enable SNMP authentication trap support.
Syntax
enable snmp authenticate trap
Description The enable snmp authenticate trap command enables SNMP
authentication trap support on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command
Example usage:
To turn on SNMP authentication trap support:
DGS3100# enable snmp authenticate trap
Success.
DGS3100#
disable snmp authenticate trap
Purpose To disable SNMP authentication trap support.
Syntax
disable snmp authenticate trap
Description The disable snmp authenticate trap command disables SNMP
authentication trap support on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command
Example usage:
To disable the SNMP authentication trap support:
DGS3100# disable snmp authenticate trap