DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
145
disable sntp
Purpose To disable SNTP server support.
Syntax
disable sntp
Description The disable sntp command disables SNTP support.
Parameters None.
Restrictions Only administrator or operator level users can issue this command.
Example usage:
To disable SNTP support:
DGS3100# disable sntp
Success.
DGS3100#
config time date
Purpose To manually configure system time and date settings.
Syntax
config time date <date ddmmyyyy> <time hh:mm:ss>
Description The config time date command configures the system time and
date settings. These will be overridden if SNTP is configured and
enabled.
Parameters date <ddmmyyyy> – Specifies the date, using two numerical
characters for the day of the month, two numerical characters for the
name of the month, and four numerical characters for the year. For
example: 03082008.
Time <hh:mm:ss> – Specifies the system time, using the format
hh:mm:ss; that is, two numerical characters each for the hour using
a 24-hour clock, the minute and second. For example: 19:42:30.
Restrictions Only administrator or operate-level users can issue this command.
Manually configured system time and date settings are overridden if
SNTP support is enabled.
Example usage:
To manually set system time and date settings:
DGS3100# config time 30072008 16:30:30
Success.
DGS3100#
To Next Page
Loading...
Need help?
General
