DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
3
COMMAND SYNTAX
The following symbols are used to describe how command entries are made and values and arguments
are specified in this manual. The online help contained in the CLI and available through the console
interface uses the same syntax.
NOTE: All commands are case-sensitive. Be sure to disable Caps Lock or any other unwanted
function that changes text case.
<angle brackets>
Purpose Encloses a variable or value that must be specified.
Syntax
create account [admin | oper |user] <username 15>
Description In the above syntax example, supply a username in the
<username> space. Do not type the angle brackets.
Example
Command
create account admin newadmin1
[square brackets]
Purpose Encloses a required value or set of required arguments. One value
or argument can be specified.
Syntax
create account [admin | oper |user] <username 15>
Description In the above syntax example, specify admin, oper or a user level
account to be created. Do not type the square brackets.
Example
Command
create account user newuser1
| vertical bar
Purpose Separates two or more mutually exclusive items in a list, one of
which must be entered.
Syntax
create account [admin | oper | user] <username 15>
Description In the above syntax example, specify admin, oper, or user. Do not
type the vertical bar.
Example
Command
create account user newuser1
All commands are case-sensitive. Be sure to disable Caps Lock or any other unwanted function that
changes text case.
8
To Next Page
Loading...
Need help?
General
