DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
9
{braces}
Purpose Encloses an optional value or set of optional arguments.
Syntax reset
Description execute “reset” will return the switch to its factory default setting.
Example
command
reset
Please be aware that all configuration will be reset to default value.
Are you sure you want to proceed with system reset now? (Y/N)[N] N
Line Editing Key Usage
Delete Deletes the character under the cursor and then shifts the
remaining characters in the line to the left.
Backspace Deletes the character to the left of the cursor and then shifts the
remaining characters in the line to the left.
Insert or Ctrl+R Toggle on and off. When toggled on, inserts text and shifts previous
text to the right.
Left Arrow Moves the cursor to the left.
Right Arrow Moves the cursor to the right.
Up Arrow Repeats the previously entered command. Each time the up arrow
is pressed, the command previous to that displayed appears. This
way it is possible to review the command history for the current
session. Use the down arrow to progress sequentially forward
through the command history list.
Down Arrow The down arrow displays the next command in the command
history entered in the current session. This displays each command
sequentially as it was entered. Use the up arrow to review previous
commands.
Tab Shifts the cursor to the next field to the left.
To Next Page
Loading...
Need help?
General
