D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
38
all − Specifies that all of the SNMP views on the Switch will be
deleted.
<oid> − The object ID that identifies an object tree (MIB tree) that is
deleted from the Switch.
Restrictions Only administrator or operate-level users can issue this command.
Example usage:
To delete a previously configured SNMP view from the Switch:
DGS3100# delete snmp view dlinkview all
Success.
DGS3100#
show snmp view
Purpose To display an SNMP view previously created on the Switch.
Syntax
show snmp view {<view_name 30>}
Description The show snmp view command displays an SNMP view previously
created on the Switch.
Parameters <view_name 30> − A string of up to 30 alphanumeric characters that
identifies the SNMP view to be displayed.
Restrictions None.
Example usage:
To display SNMP view configuration:
DGS3100# show snmp view
View Name Subtree View Type
------------------- -------------------------- ---------
Default iso included
Default snmpNotificationMIB excluded
Default snmpVacmMIB excluded
Default snmpCommunityMIB excluded
Default snmpTargetAddrTable excluded
Default snmpTargetParamsTable excluded
Default usmUser excluded
Default rndCommunityTable excluded
DefaultSuper iso included
Total Entries: 9
DGS3100#

D-Link DGS-3100 SERIES Specifications

General

Type	Managed
Layer	Layer 2+
Ports	10/100/1000BASE-T
SFP Ports	2 or 4 (depends on the model)
Additional SFP Ports	No
VLANs	Yes
Stacking	Yes, Physical Stacking
QoS	Yes
Jumbo Frame Support	Up to 9K bytes
Management	Web-based
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Model	DGS-3100 SERIES
Storage Temperature	-40°C to 70°C