D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
29
each unit.
Syntax
show environment
Description The show environment command displays the side fan status as
well as the temperature for each unit in the stack and the warning
temperature of each unit, which means the maximum allowed
operating temperature of the device.
NA means that the device HW revision does not support temperature
reading
Parameters None.
Restrictions None.
Example usage:
To display the Environment options:
DGS-3100# show environment
Unit Side Fan Temperature Warning
(Celsius) Temperature
---- ------------ ------------------- -----------------
1 OK NA NA
3 OK 32 63
4 OK 34 79
5 OK NA NA
DGS-3100#

D-Link DGS-3100 SERIES Specifications

General

Type	Managed
Layer	Layer 2+
Ports	10/100/1000BASE-T
SFP Ports	2 or 4 (depends on the model)
Additional SFP Ports	No
VLANs	Yes
Stacking	Yes, Physical Stacking
QoS	Yes
Jumbo Frame Support	Up to 9K bytes
Management	Web-based
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Model	DGS-3100 SERIES
Storage Temperature	-40°C to 70°C