Danfoss Turbocor VTT Series - Figure 162 - Radial Bearing Screws; Figure 163 - Radial Bearing Assembly Jacking Screw Locations

126 of 165 M-SV-VT-001-EN Rev. A
Compressor Components
15. Remove the four (4) M8x65 screws that secure the Radial Bearing Assembly.
Figure 162 - Radial Bearing
Screws
Radial Bearing Screws,
Torque to 30 Nm (22 ft.lb.)
(4 places)
Figure 163 - Radial Bearing
Assembly Jacking Screw
Locations
Jacking screw
locations
(4 places)
16. Insert the four (4) jacking screws into the jacking screw locations as indicated in Figure 163
(Radial Bearing Assembly Jacking Screw Locations).