Dell PowerConnect PC5524

104 System Management Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\System_Management.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Parameters
• unit —Specifies the unit number. (Range: 1–8)
•
tag —Specifies the device asset-tag.
Default Configuration
No asset tag is defined.
The default unit number is the master unit number.
Command Mode
Global Configuration mode
Example
The following example assigns the asset-tag 2365491870 to the device.
Console(config)# asset-tag 2365491870
show system id
The show system id EXEC mode command displays the system identity
information.
Syntax
show system id [ unit unit]
Parameters
unit unit—Specifies the unit number. (Range: 1–8)
Command Mode
EXEC mode