346 Ethernet Configuration Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Ethernet.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
show port jumbo-frame
Use the show port jumbo-frame EXEC mode command to display the
configuration of jumbo frames.
Syntax
show port jumbo-frame
Command Mode
EXEC mode
Example
The following example displays the configuration of jumbo frames on the
device.
Console#
show port jumbo-frame
Jumbo frames are disabled
Jumbo frames will be enabled after reset
show errdisable interfaces
Use the show errdisable interfaces EXEC mode command to display the Err-
Disable state of all interfaces or of a specific interface.
Internal MAC Rx Errors The number of frames for which reception fails
due to an internal MAC sublayer receive error.
Received Pause Frames The number of MAC Control frames received
with an opcode indicating the PAUSE operation.
Transmitted Pause Frames The number of MAC Control frames transmitted
on this interface with an opcode indicating the
PAUSE operation.
Field Description
To Next Page
Loading...
