Dell PowerConnect PC5524

LACP Commands 541
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\LACP.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
33
LACP Commands
lacp system-priority
Use the lacp system-priority Global Configuration mode command to set the
system priority. Use the no form of this command to restore the default
configuration.
Syntax
lacp system-priority value
no lacp system-priority
Parameters
value—Specifies the system priority value. (Range: 1–65535)
Default Configuration
The default system priority is 1.
Command Mode
Global Configuration mode
Example
The following example sets the system priority to 120.
Console(config)# lacp system-priority 120