IP Addressing Commands 603
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\IP_Addressing.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Example
The following example renews an IP address that was acquired from a DHCP
server for VLAN 19.
Console#
renew dhcp vlan
19
ip default-gateway
The ip default-gateway Global Configuration mode command defines a
default gateway (device). Use the no form of this command to restore the
default configuration.
Syntax
ip default-gateway
ip-address
no ip default-gateway
Parameters
ip-address—Specifies the default gateway IP address.
Command Mode
Global Configuration mode
Default Configuration
No default gateway is defined.
Example
The following example defines default gateway 192.168.1.1.
Console(config)#
ip default-gateway
192.168.1.1
show ip interface
Use the show ip interface EXEC mode command to display the usability
status of configured IP interfaces.
To Next Page
Loading...
